Technical Specifications
Access critical performance data for our full range of industrial gasket materials. Whether you require High-Temperature Graphite, chemical-resistant Virgin PTFE, or general-purpose CNAF, our specification library ensures you have the right data to make an informed decision. Browse the table below to compare temperature ranges, pressure classes, and media compatibility for your specific project.
Gasket Material Specifications
Select the right material for your application below. These specifications cover our most common industrial gasket materials, including temperature limits, pressure ratings, and chemical compatibility. Always consult the official data sheet before final selection.
| Material | Max Temp | Pressure | Cut Method | Key Media | Data Sheet |
|---|---|---|---|---|---|
| CNAF – Klinger C-4400 Aramid fibres bonded with NBR. General purpose industrial grade. | 200°C | High | Laser / Knife | WaterSteamOil | |
| Graphite Laminate (Topgraph 2000) Graphite & synthetic fibres. High load bearing and steam resistance. | 500°C | High | Knife Only | SteamChemOil | |
| Virgin PTFE Pure PTFE. Outstanding chemical resistance, food & pharma safe. | 260°C | Med | Knife Only | ChemFoodAcid | |
| Expanded PTFE (Gore GR) 100% ePTFE. Multidirectional strength, resistant to creep & cold flow. | 315°C | Med | Knife Only | ChemFood | |
| Nitrile (NBR) Premium grade. Excellent resistance to oils, fuels, and greases. | 90°C | Med | Laser / Knife | OilFuelGrease | |
| EPDM Rubber Excellent for UV/weathering, water, and steam. (Not for oils). | 120°C | Med | Laser / Knife | WaterSteamUV | |
| Viton / FKM 100% Chemours Viton. High temp, aggressive chemical/acid resistance. | 200°C | Med | Knife Only | FuelChemAcid | |
| Neoprene Chloroprene (CR). Good all-rounder, moderate oil and weathering resistance. | 100°C | Low | Laser / Knife | WaterAir | |
| Silicone FDA compliant. Excellent for food, drinking water, and high heat. | 230°C | Low | Knife Preferred | FoodAir | |
| Rubberised Cork Cork granules with SBR binder. Compressible, good for uneven surfaces. | 110°C | Low | Laser / Knife | OilAir |
|